Sony IPELA PCS-G50 Operating Instructions Manual page 207

1
Select "Detail Dial" in the launcher menu to display the Dial menu.
2
Select "SIP" under "Line I/F".
3
Enter the address of a remote party in the IP text box.
The format of the address may be the following:
• 4000 (number assigned by the SIP server)
• 4000@sip.com
• 192.168.1.1 (IP address)
Note
An IP address can only be used when the SIP server is turned off.
4
Select "Dial", then press the PUSH ENTER button, or press the
CONNECT/DISCONNECT (
The system begins dialing the party entered in step 3. "Dialing" appears on the
monitor screen, and the ON LINE indicator (blue) on the Communication
Terminal blinks.
When the System connects to the system on the remote site, the message
"Meeting starts!" appears on the screen, and the ON LINE indicator stops
blinking and lights.
To dial the remote parties for a multipoint videoconference one by one
After staring communication with the remote party selected first, press the
CONNECT/DISCONNECT (
open the submenu.
/
Disconnect
Cancel
/ ) button on the Remote Commander.
) button on the Remote Commander to
Phone Book
Dial
History
207