Sony IPELA PCS-G50 Operating Instructions Manual page 86

Note
To connect to the remote party by entering all the telephone numbers for the
ISDN lines used
If the videoconferencing system of the remote party is not equipped with the
bonding function, entering one remote party's telephone number does not allow
automatic connection of multiple ISDN lines used to connect to the remote party.
To connect to the remote party by entering all the telephone numbers, register the
remote party's telephone numbers for the ISDN lines to be used referring to
"Registering a Remote Party – Phone Book" in chapter 2 (page 72), then connect to
the remote party according to the procedure described in "To call a remote party
registered in the Phone Book" (page 88).
4
Use the V, v, B or b button to select "Dial" in the lower part of the menu,
then press the PUSH ENTER button, or press the CONNECT/
DISCONNECT (
The system begins dialing the IP address or ISDN telephone number entered in
step 3. "Dialing" appears on the monitor screen, and the ON LINE indicator
(blue) on the Communication Terminal blinks.
When the system connects to the remote system, the message "Meeting starts!"
appears on the screen, and the ON LINE indicator stops blinking and lights in
blue.
Now you can start a videoconference.
To cancel dialing before connecting
While "Dialing" is displayed on the monitor screen, press the PUSH ENTER
button or the CONNECT/DISCONNECT (
Commander.
To save the entered IP address or ISDN line number in the Phone Book
Select "Save" with the V, v, B or b button, then press the PUSH ENTER
button on the Remote Commander. The List Edit menu is displayed. Save the
address or number you entered into the Phone Book.
For details on the List Edit menu, see "Registering a Remote Party – Phone
Book" on page 72.
86
Starting a Conference by Calling a Remote Party
/ ) button on the Remote Commander.
Picture on the local site
Picture on the remote site
Meeting starts!
/ ) button on the Remote