Table of Contents
Advertisement
Predefined user roles
network-admin
Parameters
vlan-id: Specifies a VLAN ID in the range of 1 to 4094. Though VLAN 1 is in the valid value range, it
cannot be configured in the command.
Usage guidelines
If the specified VLAN is a primary VLAN that has been associated with secondary VLANs, the
command assigns the port to the associated secondary VLANs. Also, the following events occur:
•
For an access port, the device performs the following tasks:
Changes the port link type to hybrid.
Configures the primary VLAN as the PVID.
Assign the port to the primary VLAN and its associated secondary VLANs as an untagged
member.
•
For a trunk port, the device does not change the port link type or PVID.
•
For a hybrid port, the device does not change the port link type or PVID.
If the hybrid port has been a tagged or untagged member of the primary VLAN and part of its
associated secondary VLANs, this member attribute remains in these VLANs. The device
assigns the hybrid port to the rest of the associated secondary VLANs as an untagged
member.
If the hybrid port does not allow any of the primary VLAN and its associated secondary
VLANs, the command assigns the port to these VLANs as an untagged member.
If you execute this command on a promiscuous port, the system automatically executes the undo
port private-vlan command and then the port private-vlan promiscuous command.
The undo port private-vlan command does not change the VLAN attributes (allowed secondary
VLANs, link type, and PVID) of the port.
When you execute the undo port private-vlan command on a promiscuous port of a VLAN, the
command removes the port from the VLAN.
You can configure the VLAN as a primary VLAN before or after you execute the port private-vlan
vlan-id promiscuous command.
The port private-vlan promiscuous command is mutually exclusive with the port private-vlan
trunk promiscuous and port private-vlan trunk secondary commands.
Examples
In this example, VLAN 2 is a primary VLAN, and it is associated with secondary VLAN 20.
# Display information about GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] display this
#
interface GigabitEthernet1/0/1
#
return
# Configure GigabitEthernet 1/0/1 as a promiscuous port of primary VLAN 2, and then verify the
configuration.
[Sysname-GigabitEthernet1/0/1] port private-vlan 2 promiscuous
[Sysname-GigabitEthernet1/0/1] display this
#
208
Advertisement
Table of Contents
