Table of Contents
Advertisement
Field
Untagged
port
Use port to assign the specified access ports to a VLAN.
Use undo port to remove the specified access ports from a VLAN.
Syntax
port interface-list
undo port interface-list
Default
All ports are in VLAN 1.
Views
VLAN view
Predefined user roles
network-admin
Parameters
interface-list: Specifies a space-separated list of up to 10 Ethernet interface items. Each item
specifies an Ethernet interface or a range of Ethernet interfaces in the form of interface-type
interface-number1 to interface-type interface-number2. The value for the interface-number2
argument must be equal to or greater than the value for the interface-number1 argument.
Usage guidelines
This command is applicable only to access ports.
By default, all ports are access ports. You can manually configure the port type. For more information,
see
"port
link-type."
Examples
# Assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/3 to VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] port gigabitethernet 1/0/1 to gigabitethernet 1/0/3
Related commands
display vlan
port access vlan
Use port access vlan to assign the access ports to the specified VLAN.
Use undo port access vlan to restore the default.
Syntax
port access vlan vlan-id
undo port access vlan
Description
VLANs from which the port sends packets after removing VLAN tags.
177
Advertisement
Table of Contents
