Table of Contents
Advertisement
Parameters
agent: Specifies an LLDP agent type. If no agent type is specified in Ethernet interface view, the
command configures the types of advertisable TLVs for nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.
all: Advertises all TLVs of the specified type.
•
Enables the interface to advertise the following TLVs:
All basic LLDP TLVs if the all keyword is specified for basic-tlv.
All IEEE 802.1 organizationally specific LLDP TLVs if the all keyword is specified for
dot1-tlv.
All IEEE 802.3 organizationally specific LLDP TLVs if the all keyword is specified for
dot3-tlv.
•
Enables the interface to advertise all LLDP-MED TLVs except location identification TLVs if the
all keyword is specified for med-tlv.
basic-tlv: Advertises basic LLDP TLVs.
management-address-tlv [ ip-address ]: Advertises management address TLVs. ip-address
specifies the management address to be advertised. By default:
•
For a Layer 2 Ethernet or aggregate interface, the management address is the primary IP
address of the VLAN interface meeting the following requirements:
In up state.
The corresponding VLAN ID is the lowest among the VLANs permitted on the port.
If none of the VLAN interfaces of the permitted VLANs is assigned an IP address or all VLAN
interfaces are down, the MAC address of the port will be advertised.
•
For, management Ethernet interface, the management address is its own IP address. If no IP
address is configured for the, management Ethernet interface, the MAC address of the port will
be advertised.
When you execute the undo command:
•
If you specify the ip-address argument, the command disable the advertisement of the specified
IP addresses.
•
If you do not specify the ip-address argument, the command disable the advertisement of
management address TLVs.
port-description: Advertises port description TLVs.
system-capability: Advertises system capabilities TLVs.
system-description: Advertises system description TLVs.
system-name: Advertises system name TLVs.
dot1-tlv: Advertises IEEE 802.1 organizationally specific LLDP TLVs.
port-vlan-id: Advertises port VLAN ID TLVs.
protocol-vlan-id [ vlan-id ]: Advertises port and protocol VLAN ID TLVs. The vlan-id argument
specifies a VLAN ID in the TLVs to be advertised. The VLAN ID is in the range of 1 to 4094, and the
default is the lowest VLAN ID on the port.
vlan-name [ vlan-id ]: Advertises VLAN name TLVs. The vlan-id argument specifies a VLAN ID in the
TLVs to be advertised. The VLAN ID is in the range of 1 to 4094, and the default is the lowest VLAN
ID on the port.
management-vid [ mvlan-id ]: Advertises the management VLAN ID TLV. The mvlan-id argument
specifies a management VLAN ID in the TLVs to be advertised. The management VLAN ID is in the
283
Advertisement
Table of Contents
