Display Stp Tc - HP FlexNetwork 5130 HI series Command Reference Manual

Layer 2 - lan switching
Table of Contents

Advertisement

display stp tc

Use display stp tc to display the incoming and outgoing TC/TCN BPDU statistics for ports.
Syntax
display stp [ instance instance-list | vlan vlan-id-list ] tc [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance instance-list: Specifies a space-separated list of up to 10 MSTI items. Each item specifies
an MSTI or a range of MSTIs in the form of instance-id1 [ to instance-id2 ]. The value for instance-id2
must be equal to or greater than the value for instance-id1. The value range for the instance-id
argument is 0 to 4094, and the value 0 represents the CIST.
vlan vlan-id-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a
VLAN or a range of VLANs in the form of vlan-id1 [ to vlan-id2 ]. The value for vlan-id2 must be equal
to or greater than the value for vlan-id1. The value range for the vlan-id argument is 1 to 4094.
slot slot-number: Specifies an IRF member device by its member ID. If this option is not specified,
this command applies to all member devices in the IRF fabric.
Usage guidelines
In STP or RSTP mode, the output is sorted by port name.
In PVST mode, the command output is sorted by VLAN ID and by port name in each VLAN.
If you do not specify a VLAN, this command applies to all VLANs.
If you specify a VLAN list, this command applies to the specified VLANs.
In MSTP mode, the command output is sorted by MSTI ID and by port name in each MSTI.
If you do not specify an MSTI, this command applies to all MSTIs.
If you specify an MSTI list, this command applies to the specified MSTIs.
Examples
# In MSTP mode, display the incoming and outgoing TC/TCN BPDU statistics for all ports on IRF
member device 1 in MSTI 0.
<Sysname> display stp instance 0 tc slot 1
-------------- STP slot 1 TC or TCN count -------------
MST ID
0
0
# In PVST mode, display the incoming and outgoing TC/TCN BPDU statistics for all ports on IRF
member device 1 in VLAN 2.
<Sysname> display stp vlan 2 tc slot 1
-------------- STP slot 1 TC or TCN count -------------
VLAN ID
2
2
Port
GigabitEthernet1/0/1
GigabitEthernet1/0/2
Port
GigabitEthernet1/0/1
GigabitEthernet1/0/2
Receive
6
0
Receive
6
0
126
Send
4
2
Send
4
2

Advertisement

Table of Contents
loading

Table of Contents