Table of Contents
Advertisement
Illegal: 0 packet(s)
Sent LACP Packets: 7 packet(s)
Table 20 Command output
Field
Flags
Aggregate Interface
Local
Oper-key
Flag
Remote
System ID
Received
Packets
Illegal
Sent LACP Packets
display link-aggregation summary
Use display link-aggregation summary to display brief information about all aggregation groups.
Syntax
display link-aggregation summary
Views
Any view
Predefined user roles
network-admin
network-operator
Description
LACP state flags. This field is one byte long, represented by ABCDEFGH from
the least significant bit to the most significant bit. The letter is present when its bit
is 1 and absent when its bit is 0.
•
A—Indicates whether LACP is enabled. 1 indicates enabled, and 0 indicates
disabled.
•
B—Indicates the LACP short or long timeout. 1 indicates short timeout, and
0 indicates long timeout.
•
C—Indicates whether the sending system considers that the link is
aggregatable. 1 indicates yes, and 0 indicates no.
•
D—Indicates whether the sending system considers that the link is
synchronized. 1 indicates yes, and 0 indicates no.
•
E—Indicates whether the sending system considers that the incoming
frames are collected. 1 indicates yes, and 0 indicates no.
•
F—Indicates whether the sending system considers that the outgoing
frames are distributed. 1 indicates yes, and 0 indicates no.
•
G—Indicates whether the sending system receives frames in default state. 1
indicates yes, and 0 indicates no.
•
H—Indicates whether the sending system receives frames in expired state.
1 indicates yes, and 0 indicates no.
Aggregate interface to which the member port belongs.
Information about the local end.
Operational key.
LACP protocol state flag.
Information about the peer end.
Peer system ID, containing the system LACP priority and the system MAC
address.
LACP
Total number of LACP packets received.
Total number of illegal packets.
Total number of LACP packets sent.
87
Advertisement
Table of Contents
