HP FlexNetwork 5130 HI series Command Reference Manual page 265

Layer 2 - lan switching
Table of Contents

Advertisement

Update time
Chassis type
Chassis ID
Port ID type
Port ID
Time to live
Port description
System name
System description
System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge
System capabilities enabled
Management address type
Management address
Management address interface type : IfIndex
Management address interface ID
Management address OID
Port VLAN ID(PVID): 1
Port and protocol VLAN ID(PPVID) : 12
Port and protocol VLAN supported : Yes
Port and protocol VLAN enabled
VLAN name of VLAN 12: VLAN 0012
Auto-negotiation supported : Yes
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Power type
Power source
Power priority
PD requested power value
PSE allocated power value
Link aggregation supported : Yes
Link aggregation enabled
Aggregation port ID
Maximum frame size
# Display the brief LLDP information that all LLDP agents on all ports received from the neighboring
devices.
<Sysname> display lldp neighbor-information
LLDP neighbor-information of port 52[GigabitEthernet1/0/3]:
LLDP agent nearest-bridge:
LLDP neighbor index : 3
ChassisID/subtype
PortID/subtype
Capabilities
: 0 days, 0 hours, 1 minutes, 1 seconds
: MAC address
: 000f-0055-0002
: Interface name
: GigabitEthernet1/0/1
: 121
: GigabitEthernet1/0/1 Interface
: Sysname
: HPE Comware Platform Software
: Bridge, Router, Customer Bridge
: IPv4
: 192.168.1.55
: Unknown
: 0
: Yes
: Yes
: Speed(1000)/Duplex(Full)
: PD
: Yes
: Yes
: Yes
: Signal
: Class 0
: Type 2 PD
: PSE and local
: High
: 21.1 w
: 15.3
: Yes
: 52
: 1500
: 0011-2233-4400/MAC address
: 000c-29f5-c71f/MAC address
: Bridge, Router, Customer Bridge
257

Advertisement

Table of Contents
loading

Table of Contents