HP FlexNetwork 5130 HI series Command Reference Manual page 89

Layer 2 - lan switching
Table of Contents

Advertisement

Output (normal): 1042508 packets, 133441832 bytes
1042306 unicasts, 0 broadcasts, 202 multicasts, 0 pauses
Output: 0 output errors, 0 underruns, 0 buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, 0 no carrier
# Display brief information about Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> display interface bridge-aggregation 1 brief
Brief information on interfaces in bridge mode:
Link: ADM - administratively down; Stby - standby
Speed: (a) - auto
Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
BAGG1
Table 17 Command output
Field
Bridge-Aggregation1
Current state
IP packet frame type
Description
Bandwidth
Unknown-speed mode, unknown-duplex mode
PVID
Port link-type
Tagged VLANs
Link Speed
Duplex Type PVID Description
UP
auto
A
81
A
1
Description
Layer 2 aggregate interface name.
Aggregate interface status:
DOWN
(Administratively
interface is administratively shut down with the
shutdown command.
DOWN—The interface is administratively up
but physically down (possibly because no
physical link is present or the link has failed).
UP—The
Ethernet
administratively and physically up.
IPv4 packet frame format.
The
value
PKTFMT_ETHNT_2
packets are encapsulated in Ethernet II format.
Partial or complete interface description configured
by using the description command.
If the description keyword is not specified in
the display interface brief command, this field
displays only the first 27 characters of the
interface description.
If the description keyword is specified in the
display interface brief command, this field
displays the complete interface description.
Expected bandwidth of the interface.
The interface speed and duplex mode are unknown.
Port VLAN ID (PVID).
Port link type: access, trunk, or hybrid.
Packets from the specified VLANs are sent out of
this interface with a VLAN tag:
Tagged Vlan: none—All packets are sent out
of this interface without a VLAN tag.
Tagged Vlan: 1—Packets from VLAN 1 are
sent out of this interface with a VLAN tag.
This field is displayed when the port link type is
down)—The
interface
is
both
indicates
that

Advertisement

Table of Contents
loading

Table of Contents