Vlan-Group; Vlan-List - HP FlexNetwork 5130 HI series Command Reference Manual

vlan-group

Use vlan-group to create a VLAN group and enter VLAN group view.
Use undo vlan-group to delete a VLAN group.
Syntax
vlan-group group-name
undo vlan-group group-name
Default
No VLAN group exists.
Views
System view
Predefined user roles
network-admin
Parameters
group-name: Specifies a VLAN group by its name, a case-sensitive string of 1 to 31 characters. The
first character must be an alphabetical character.
Usage guidelines
After you configure a VLAN group on the device, the authentication sever can assign the VLAN
group name to the 802.1X user that passes authentication. The VLAN group name identifies this
group of VLANs. For more information about 802.1X authentication, see Security Configuration
Guide.
Examples
# Create a VLAN group named test001 and enter VLAN group view.
<Sysname> system-view
[Sysname] vlan-group test001
[Sysname-vlan-group-test001]
Related commands

vlan-list

vlan-list
Use vlan-list to add VLANs to a VLAN group.
Use undo vlan-list to remove VLANs from a VLAN group.
Syntax
vlan-list vlan-id-list
undo vlan-list vlan-id-list
Default
No VLAN exists in a VLAN group.
Views
VLAN group view
198