Table of Contents
Advertisement
Loopback, null, and inloopback interface
commands
bandwidth
Use bandwidth to configure the expected bandwidth of an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth of a loopback interface is 0 kbps.
Views
Loopback interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the following items:
•
Bandwidth assignment with CBQ. For more information, see ACL and QoS Configuration
Guide.
Examples
# Set the expected bandwidth of Loopback 1 to 1000 kbps.
<Sysname> system-view
[Sysname] interface loopback 1
[Sysname-LoopBack1] bandwidth 1000
default
Use default to restore the default settings for a loopback or null interface.
Syntax
default
Views
Loopback interface view, null interface view
Predefined user roles
network-admin
40
Advertisement
Table of Contents
