Table of Contents
Advertisement
Table 44 Command output
Field
VLAN ID
Protocol index
Protocol type
Related commands
•
display protocol-vlan interface
•
port hybrid protocol-vlan
•
protocol-vlan
port hybrid protocol-vlan
Use port hybrid protocol-vlan to associate a hybrid port with the specified protocols in a VLAN.
Use undo port hybrid protocol-vlan to remove the association.
Syntax
port hybrid protocol-vlan vlan vlan-id { protocol-index [ to protocol-end ] | all }
undo hybrid protocol-vlan { vlan vlan-id { protocol-index [ to protocol-end ] | all } | all }
Default
A port is not associated with any protocol-based VLANs.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view,
Predefined user roles
network-admin
Parameters
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094.
protocol-index: Specifies a beginning protocol template index in the range of 0 to 65535.
to protocol-end: Specifies an end protocol template index of a protocol template range, in the range
of 0 to 65535. The value for the protocol-end argument must be greater than or equal to the
beginning protocol template index.
all: Specifies all protocol templates.
Usage guidelines
Before you use this command, perform the following tasks:
•
Create a VLAN and associate it with specified protocols.
•
Configure the port link type as hybrid.
•
Configure the port to allow the protocol-based VLAN to pass through.
When you execute the undo port hybrid protocol-vlan command on a port, follow these
guidelines:
•
If you specify both the vlan-id argument and the all keyword, this command disassociates the
port from all protocol templates of the specified VLAN.
Description
ID of the protocol-based VLAN.
Protocol template index.
Protocol type or encapsulation format specified by the protocol
template.
194
Advertisement
Table of Contents
