Table of Contents
Advertisement
Syntax
port-isolate group group-number
undo port-isolate group { group-number | all }
Default
No isolation group exists.
Views
System view
Predefined user roles
network-admin
Parameters
group-number: Specifies an isolation group by its number in the range of 1 to 8.
all: Deletes all isolation groups.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Create isolation group 2.
<Sysname> system-view
[Sysname] port-isolate group 2
109
Advertisement
Table of Contents
