Field
Aggregate Interface
Aggregation Mode
System ID
Local
Remote
interface bridge-aggregation
Use interface bridge-aggregation to create a Layer 2 aggregate interface and enter Layer 2
aggregate interface view.
Use undo interface bridge-aggregation to delete a Layer 2 aggregate interface.
Syntax
interface bridge-aggregation interface-number
undo interface bridge-aggregation interface-number
Default
No Layer 2 aggregate interface is created.
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a Layer 2 aggregate interface number in the range of 1 to 1024.
Usage guidelines
When you create a Layer 2 aggregate interface, the system automatically creates a Layer 2
aggregation group with the same number. The aggregation group operates in static aggregation
mode by default.
Description
Name of the aggregate interface.
Aggregation group type:
•
S—Static.
•
D—Dynamic.
Local system ID, containing the local system LACP priority and the local system
MAC address.
Information about the local end:
•
Port—Port type and number.
•
Status—Port state, which can be Selected or Unselected.
•
Priority—Port priority.
•
Oper-Key—Operational key.
•
Flag—LACP state flag.
NOTE:
For static aggregation groups, the Flag field is not displayed.
Information about the peer end:
•
Actor—Type and number of the local port.
•
Partner—Index of the peer port.
•
Priority—Priority of the peer port.
•
Oper-Key—Operational key of the peer port.
•
System ID—System ID of the peer end.
•
Flag—LACP state flag of the peer end.
91