Table of Contents
Advertisement
Syntax
link-aggregation load-sharing mode local-first
undo link-aggregation load-sharing mode local-first
Default
Local-first load sharing is enabled for link aggregation.
Views
System view
Predefined user roles
network-admin
Usage guidelines
After you disable local-first load sharing, the packets will be load shared among all Selected ports of
the aggregate interface on all IRF member devices.
Local-first load sharing for link aggregation takes effect on only known unicast packets.
Examples
# Disable local-first load sharing for link aggregation.
<Sysname> system-view
[Sysname] undo link-aggregation load-sharing mode local-first
link-aggregation mode
Use link-aggregation mode dynamic to configure an aggregation group to operate in dynamic
aggregation mode and enable LACP.
Use undo link-aggregation mode to restore the default.
Syntax
link-aggregation mode dynamic
undo link-aggregation mode
Default
An aggregation group operates in static aggregation mode.
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
Examples
# Configure Layer 2 aggregation group 1 to operate in dynamic aggregation mode.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation mode dynamic
link-aggregation port-priority
Use link-aggregation port-priority to set the port priority of an interface.
Use undo link-aggregation port-priority to restore the default.
101
Advertisement
Table of Contents
