Lldp Admin-Status - HP FlexNetwork 5130 HI series Command Reference Manual

Layer 2 - lan switching
Table of Contents

Advertisement

Field
IEEE 802.1 extended TLV
IEEE 802.3 extended TLV
LLDP-MED extend TLV
Inventory TLV

lldp admin-status

Use lldp admin-status to specify the LLDP operating mode.
Use undo lldp admin-status to restore the default.
Syntax
In Layer 2 Ethernet interface view or management Ethernet interface view:
lldp [ agent { nearest-customer | nearest-nontpmr } ] admin-status { disable | rx | tx | txrx }
undo lldp [ agent { nearest-customer | nearest-nontpmr } ] admin-status
In Layer 2 aggregate interface view:
lldp agent { nearest-customer | nearest-nontpmr } admin-status { disable | rx | tx | txrx }
undo lldp agent { nearest-customer | nearest-nontpmr } admin-status
Default
The nearest bridge agent operates in txrx mode, and the nearest customer bridge agent and nearest
non-TPMR bridge agent operate in disable mode.
Description
System description TLV.
System capabilities TLV.
Management address TLV.
IEEE 802.1 organizationally specific TLVs:
Port VLAN ID TLV.
Port and protocol VLAN ID TLV.
VLAN name TLV.
DCBX TLV. The switch does not support DCBX TLV.
EVB TLV. The switch does not support EVB TLV.
Management VID TLV..
IEEE 802.3 organizationally specific TLVs:
MAC-Physic TLV.
Power via MDI TLV.
Link aggregation TLV.
Maximum frame size TLV.
LLDP-MED TLVs:
Capabilities TLV.
Network Policy TLV.
Extended Power-via-MDI TLV.
Location Identification TLV.
Inventory TLV.
Inventory TLVs:
Hardware Revision TLV.
Firmware Revision TLV.
Software Revision TLV.
Serial Number TLV.
Manufacturer Name TLV.
Model name TLV.
Asset ID TLV.
269

Advertisement

Table of Contents
loading

Table of Contents