Table of Contents
Advertisement
--------------------------------------------------------------------------------
GE1/0/1
GE1/0/2
Remote:
Actor
--------------------------------------------------------------------------------
GE1/0/1
GE1/0/2
# Display detailed information about Layer 2 aggregation group 20, which is a static aggregation
group.
<Sysname> display link-aggregation verbose bridge-aggregation 20
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected, I -- Individual
Flags:
A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation20
Aggregation Mode: Static
Loadsharing Type: Shar
Port
--------------------------------------------------------------------------------
GE1/0/1
GE1/0/2
GE1/0/3
Table 22 Command output
Field
Loadsharing Type
Port Status
Flags
S
32768
2
S
32768
2
Partner Priority Oper-Key
1
32768
2
32768
Status
Priority Oper-Key
U
32768
1
U
32768
1
U
32768
1
Description
Load sharing type:
•
Shar—Load sharing.
•
NonS—Non-load sharing.
Port state: Selected, Unselected, or Individual.
LACP state flags. This field is one byte long, represented by ABCDEFGH from
the least significant bit to the most significant bit. The letter is present when its bit
is 1 and absent when its bit is 0.
•
A—Indicates whether LACP is enabled. 1 indicates enabled, and 0 indicates
disabled.
•
B—Indicates the LACP short or long timeout. 1 indicates short timeout, and
0 indicates long timeout.
•
C—Indicates whether the sending system considers that the link is
aggregatable. 1 indicates yes, and 0 indicates no.
•
D—Indicates whether the sending system considers that the link is
synchronized. 1 indicates yes, and 0 indicates no.
•
E—Indicates whether the sending system considers that the incoming
frames are collected. 1 indicates yes, and 0 indicates no.
•
F—Indicates whether the sending system considers that the outgoing
frames are distributed. 1 indicates yes, and 0 indicates no.
•
G—Indicates whether the sending system receives frames in default state. 1
indicates yes, and 0 indicates no.
•
H—Indicates whether the sending system receives frames in expired state.
1 indicates yes, and 0 indicates no.
90
{ACDEF}
{ACDEF}
SystemID
2
0x8000, 000f-e267-57ad {ACDEF}
2
0x8000, 000f-e267-57ad {ACDEF}
Flag
Advertisement
Table of Contents
