Lldp Timer Fast-Interval; Lldp Timer Notification-Interval - HP FlexNetwork 5130 HI series Command Reference Manual

Layer 2 Ethernet interface view
Management Ethernet interface view
Predefined user roles
network-admin
Parameters
agent: Specifies an LLDP agent type. If no agent type is specified in Ethernet interface view, the
command enables LLDP trapping for nearest bridge agents.
nearest-customer: Specifies nearest customer bridge agents.
nearest-nontpmr: Specifies nearest non-TPMR bridge agents.
Examples
# Enable LLDP trapping for the nearest customer bridge agents on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] lldp agent nearest-customer notification remote-change
enable

lldp timer fast-interval

Use lldp timer fast-interval to set the interval for fast LLDP frame transmission.
Use undo lldp timer fast-interval to restore the default.
Syntax
lldp timer fast-interval interval
undo lldp timer fast-interval
Default
The interval for fast LLDP frame transmission is 1 second.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Sets an interval for fast LLDP frame transmission, in the range of 1 to 3600 seconds.
Examples
# Set the interval for fast LLDP frame transmission to 2 seconds.
<Sysname> system-view
[Sysname] lldp timer fast-interval 2

lldp timer notification-interval

Use lldp timer notification-interval to set the LLDP trap and LLDP-MED trap transmission interval.
Use undo lldp timer notification-interval to restore the default.
Syntax
lldp timer notification-interval interval
279