Sleep Timeout (Id=103); Movement Source (Id=100); Static Navigation (Id=106); Static Navigation Settings (Id=112) - Teltonika FMB920 User Manual

this increases power consumption. In this mode, device should received/send SMS and
make/receive calls. Also not closes GPRS context, if previously opened.
Minimum Maximum
value value
0 3
7.1.2

Sleep timeout (ID=103)

Sleep timeout is time after which FMB920 goes to GPS sleep, Deep Sleep or Online Deep
Sleep if other requirements are met. It is measured in minutes.
Minimum Maximum
value value
1 3000
7.1.3

Movement Source (ID=100)

Device can operate and change its working mode according to motion detection source:
ignition (value 0), movement sensor (value 1), GPS (value 2), CAN speed (value 3).
Minimum Maximum
value value
0 3
7.1.4

Static Navigation (ID=106)

When static navigation is enabled, FMB920 filters out GPS jumps, when it is not moving.
When it is disabled, it does not make any changes to collected GPS data.
Minimum Maximum
value value
0 1
7.1.5

Static Navigation Settings (ID=112)

Sets static navigation exit (movement) detection sorces.
Minimum Maximum
value value
0 1
7.1.6

Saving/Sending without time synchronization (ID=107)

When this feature is enabled (value = 1), then records can be saved and sent to server
without time synchronization.
Default value Goes with (depends on)
2 Sleep timeout (ID=102)
Default value Goes with (depends on)
10
Default value Goes with (depends on)
1
Default value Goes with (depends on)
Static Navigation Settings
1
Default value Goes with (depends on)
Static Navigation (ID=106)
0 Movement Source (ID=100)

Ignition settings (ID=101)

parameters
parameters
Sleep Mode (ID=103)
parameters
-
parameters
(ID=112)
parameters
Value
type
Uint8
Value
type
Uint8
Value
type
Uint8
Value
type
Uint8
Value
type
Uint8
75