Teltonika FMB920 Installation Manual
Hide thumbs
Also See for FMB920:
- User manual (151 pages) ,
- Quick manual (19 pages) ,
- First start-up quick start manual (6 pages)
Subscribe to Our Youtube Channel
Related Manuals for Teltonika FMB920
Summary of Contents for Teltonika FMB920
- Page 1 Teltonika FMB920 GPS TRACKER INSTALLATION GUIDE Additional configuration notes if using the device on our software platform.
- Page 2 NOTES FOR SETTING IGNITION SENSE There are 3 options for detecting ignition on/off 1. DIN1 Input wire (Yellow) – Connect this wire to a suitable power feed controlled by vehicle ignition status. 2. Board Voltage – Device automatically detects voltage change when engine is switched on/off and sets the ignition status accordingly.
- Page 3 TRACKING INTERVAL SETTINGS You can change the data upload settings in the software platform. If connecting remote immobilise feature we recommend setting the ‘idle’ time interval to 30 seconds. Always ensure you tick the box marked ‘Enable the sleep mode on idle’ which switches the GPS module off when parked to preserve the vehicle battery charge level.
- Page 4 HARSH DRIVING MONITOR You can alter the sensitivity for the ‘harsh driving’ alerts in the platform device settings tab.
Need help?
Do you have a question about the FMB920 and is the answer not in the manual?
Questions and answers