You have now installed drivers for FMB920 device successfully.
Table 4 FMB920 pinout description
Pin
Pin Name
Nr.
1
VCC (1030)V DC (+)
2
GND(VCC(1030)V DC)(-)
3
DIN 1
4
AIN 1
5
OUT 1
3.4
Accessories
Note: Accessories are not included in device package, please order them
separately.
Alarm buttons, door sensors, etc.
Alarm buttons, door sensors, ignition, etc. return two states: high or low voltage. Digital
inputs are used to read this information. Figure below shows how to connect alarm button, door
sensor, etc.
Figure 4 Driver installation window
Description
Power supply for module. Power supply range (6...30) V DC (+)
Ground pin. (630)V DC (―)
Digital input, channel 1. DEDICATED FOR IGNITION INPUT
Analog input, channel 1. Input range: 0-30V DC
Digital output, channel 1. Open collector output. Max.
3,3 A.
18