Features; Eco Driving/Green Driving Scenarios - Teltonika FMB920 User Manual

27
SD Status
28 Eco Score
SMS COMMAND LIST section).
Trip odometer is Trip scenario element and it can be selected from two modes: Continuous
and Between Records. Both modes requires ignition (configured ignition source) to be turned on.
When Between Records mode is selected, when record is made, odometer resets to zero
and distance calculation starts all over again.
When Continuous odometer mode is selected, all distance calculations is counted from
records and sums them to one distance. Continuous odometer stops counting, when vehicle is at
stop and ignition is turned off.
Figure 9 Odometer continuous and Not continuous distance counting parameter example
4.4

Features

Using available features can greatly increase FMB920 usability options.
4.4.1

ECO driving/Green driving Scenarios

Four scenarios are available on FMB920 device.
Digital Output is used by scenarios – ECO driving/Green driving and/or Over Speeding;
0 – SD card not inserted
1 – SD card inserted
Eco driving score during particular trip, 0 - 10
ECO driving/Green driving Scenarios. Helps to prevent and inspect
driver about harsh driving. Eco driving scenario continuously
monitors: accelerating, braking and cornering forces depending on
build in accelerometer or Green driving depending on GPS. The device
inspects driver if needed. Monitoring sensitivity is configurable.
DOUT1 is controlled by scenario for user needs, buzzer or LED
for example. Output activation time after harsh event is also
configurable.
24