Parameter List; Parameters Value Types; System Parameters; Sleep Mode (Id=1000) - Teltonika FMA120 User Manual

8 Parameter List

8.1
8.2
8.2.1
module will never enter sleep mode, in sleep mode (value 1) module reduces level of power
usage by turning GPS module to sleep, in deep sleep mode (value 2) module turns GPS module to
sleep and switch GSM module off (note, that FMA120 do not receive SMS while in deep sleep).
Minimum
value
8.2.2
requirements are met. It is measured in minutes.
Minimum
value
8.2.3
(value 1).
Minimum
value
8.2.4
ignition (value 0), movement sensor (value 1), GPS (value 2).
Minimum
value
Downloaded from www.Manualslib.com

Parameters value types

S8 – Signed Char
S8[n] – String of n Char
U8 – Unsigned Char
U16 – Unsigned Short
S32 – Signed Integer
U32 – Unsigned Integer
U64 – Unsigned Long Long Integer

System parameters

Sleep Mode (ID=1000)

Device has two sleep modes: sleep and deep sleep mode. While sleep is disabled (value 0)
Maximum Recommended
value
0 2

Sleep timeout (ID=200)

Sleep timeout is time after which FMA120 goes to sleep or deep sleep if other
Maximum Recommended
value
1 3000

Analog Input value range (ID=1001)

Analog input measuring resolution and range can be defined as 0...10V (value 0) or 1...30V
Maximum Recommended
value
0 1

Stop Detection Source (ID=1002)

Device can operate and change its working mode according to motion detection source:
Maximum Recommended
value
0 2
manuals search engine
Goes with (depends on)
value parameters
-
Goes with (depends on)
value parameters
-
Goes with (depends on)
value parameters
-
Goes with (depends on)
value parameters
-
Value
type
U8
Value
type
U8
Value
type
U8
Value
type
U8
61