Teltonika Telematics FMB910 Quick Manual
Track & trace device
Hide thumbs
Also See for Telematics FMB910:
- Quick manual (16 pages) ,
- First start-up quick start manual (6 pages) ,
- How-to (5 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Teltonika Telematics FMB910
Summary of Contents for Teltonika Telematics FMB910
- Page 1 FMB910 Track & trace device Quick Manual v1.8...
-
Page 2: Table Of Contents
CONTENT Know your device ........................................3 Pinout ...........................................4 Wiring scheme ........................................5 Set up your device ......................................6 PC Connection (Windows) ....................................7 How to install USB drivers (Windows) ................................7 Configuration........................................8 Quick SMS configuration ....................................10 Mounting recommendations..................................12 Basic characteristics ......................................13 LED indications ......................................... 13 Electrical characteristics .................................... -
Page 3: Know Your Device
KNOW YOUR DEVICE TOP VIEW BOTTOM VIEW (WITHOUT COVER) POWER NAVIGATE STATUS MICRO-USB CABLE BATTERY MICRO-SIM SOCKET SLOT Quick Manual v1.8 // FMB910... -
Page 4: Pinout
PINOUT PIN NUMBER PIN NAME DESCRIPTION Power supply (6-30) V VCC (6-30) V DC (+) +6...30 V DC DC (+) GND (-) Ground pin Digital input, channel DIN 1 1. DEDICATED FOR DIN1 IGNITION INPUT Analog input, channel AIN1 AIN 1 1. -
Page 5: Wiring Scheme
WIRING SCHEME +6...30 V DC DIN1 IGNITION DETECTION AIN1 DOUT1 BUZZER POWER SUPPLY STARTER 6 - 30V DC Quick Manual v1.8 // FMB910... -
Page 6: Set Up Your Device
Wiki the battery in place where attach device cover back. how to enter it later in it does not obstruct other Teltonika Configurator components. Make sure that Micro- SIM card cut-off corner is pointing forward to slot. -
Page 7: Pc Connection (Windows)
Extract and run TeltonikaCOMDriver.exe. Click Next in driver installation window. In the following window click Install button. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup. teltonika-gps.com/downloads/en/FMB910/TeltonikaCOMDriver.zip Quick Manual v1.8 // FMB910... -
Page 8: Configuration
CONFIGURATION At first FMM003 device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator software. Get the latest Configurator version from here . Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed. - Page 9 Data Acquisition – where data acquiring parameters can be configured. More details about FMM003 configuration using Configurator can be found in our Wiki wiki.teltonika-gps.com/view/FMB910_Status_info wiki.teltonika-gps.com/view/FMB910_Status_info#GNSS_Info wiki.teltonika-gps.com/view/FMB910_Status_info#GSM_Info wiki.teltonika-gps.com/view/FMB910_Status_info#I.2FO_Info wiki.teltonika-gps.com/view/FMB910_Status_info#Maintenance wiki.teltonika-gps.com/index.php?title=FMB910_GPRS_settings After connection to Configurator Status window will be wiki.teltonika-gps.com/index.php?title=FMB9101_Data_acquisition_...
-
Page 10: Quick Sms Configuration
QUICK SMS CONFIGURATION Default configuration has optimal parameters present to ensure best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it: « setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0» Note: Before SMS text, two space symbols should be inserted. GPRS SETTINGS: 2001 –... - Page 11 120 seconds is off After successful SMS configuration, FMB910 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator SMS parameters wiki.teltonika-gps.com/view/Teltonika_Configurator wiki.teltonika-gps.com/view/Template:FMB_Device_Family_Parameter_list...
-
Page 12: Mounting Recommendations
MOUNTING RECOMMENDATIONS CONNECTING WIRES • Wires should be fastened to the other wires or non-moving parts. Try to avoid heat emitting and moving objects near the wires. • The connections should not be seen very clearly. If factory isolation was removed while connecting wires, it should be applied again. -
Page 13: Basic Characteristics
LED INDICATIONS BASIC CHARACTERISTICS STATUS LED INDICATIONS MODULE BEHAVIOUR MEANING Name Teltonika TM2500 Technology GSM, GPRS, GNSS, BLUETOOTH Blinking every Normal mode second Blinking every two GNSS Sleep mode seconds GPS, GLONASS, GALILEO, BEIDOU, GNSS Blinking fast for a SBAS, QZSS, DGPS, AGPS... - Page 14 OPERATING ENVIRONMENT Peak) Operating temperature -40 °C to +85 °C INTERFACE (without battery) Digital Inputs Storage temperature -40 °C to +85 °C (without battery) wiki.teltonika.lt/index.php?title=FMB910_Sleep_modes&Ultra_Deep_ 2 Sleep_mode 5% to 95% non-condensing wiki.teltonika.lt/index.php?title=FMB910_Sleep_modes&Deep_Sleep_ 3 mode IP54 wiki.teltonika.lt/index.php?title=FMB910_Sleep_modes&Online_Deep_ 4 Sleep_mode 0 °C to +45 °C wiki.teltonika.lt/index.php?title=FMB910_Sleep_modes&GPS_Sleep_...
- Page 15 Geofence, Trip Sleep, Online Deep Sleep, Sleep modes Deep Sleep, Ultra Deep Sleep Configuration and FOTA Teltonika Configurator firmware update (USB, Bluetooth) Configuration, Events, DOUT Control, Debug GPRS commands Configuration, DOUT control, Debug Time GPS, NITZ, NTP Synchronization Fuel monitoring...
-
Page 16: Electrical Characteristics
ELECTRICAL CHARACTERISTIC VALUE CHARACTERISTICS DESCRIPTION SUPPLY VOLTAGE MIN. TYP. MAX. UNIT ANALOG INPUT CHARACTERISTIC VALUE DESCRIPTION Input Voltage (Recommended SUPPLY VOLTAGE MIN. TYP. MAX. UNIT Operating Conditions) Supply Voltage Input resistance kΩ (Recommended Operating Conditions) Measurement error on 12V DIGITAL OUTPUT (OPEN DRAIN GRADE) Additional error on 12V Drain current (Digital Measurement error... -
Page 17: Safety Information
SAFETY INFORMATION Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the powe supply. All wireless data transferring devices produce This message contains information on how to operate FMB910 interference that may affect other devices which are safely. -
Page 18: Certification And Approvals
Full User‘s Manual version can be found in mixed with general household waste. Wiki 1 wiki.teltonika-gps.com/index.php?title=FMB910 The Declaration EAC and the Certificate EAC in conformity with the technical regulation TR CU of Hereby,... - Page 19 Directorate General of Resources and Equipment against harmful interference and must not for Post and Information Technology. 00647-20-08591 cause interference in duly authorized systems. CHECK ALL CERTIFICATES All newest certificates may be found in our Wiki wiki.teltonika-gps.com/view/FMB910_Certification_%26_Approvals Quick Manual v1.8 // FMB910...
-
Page 20: Warranty
Warranty does not apply to any consequential damages. • Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is defective on arrival. • More information on what is RMA wiki.teltonika-gps.com/view/RMA_guidelines Quick Manual v1.8 // FMB910...
Need help?
Do you have a question about the Telematics FMB910 and is the answer not in the manual?
Questions and answers