Parameter List; Parameters Value Types; System Parameters; Sleep Mode (Id=1000) - Teltonika FM1200 User Manual

8 Parameter List

8.1 Parameters value types

S8 – Signed Char
S8[n] – String of n Char
U8 – Unsigned Char
U16 – Unsigned Short
S32 – Signed Integer
U32 – Unsigned Integer
U64 – Unsigned Long Long Integer

8.2 System parameters

8.2.1 Sleep Mode (ID=1000)

Device has two sleep modes: sleep and deep sleep mode. While sleep is disabled
(value 0) module will never enter sleep mode, in sleep mode (value 1) module reduces
level of power usage by turning GPS module to sleep, in deep sleep mode (value 2)
module turns GPS module to sleep and switch GSM module off (note, that FM1200 do
not receive SMS while in deep sleep).
Minimu Maximu
m value m value
0 2

8.2.2 Sleep timeout (ID=200)

Sleep timeout is time after which FM1200 goes to sleep or deep sleep if other
requirements are met. It is measured in minutes.
Minimu Maximu
m value m value
1 3000
Figure 36. Terminal window for logging
Recommende Goes with (depends on)
d value
-
Recommende Goes with (depends on)
d value
-
parameters
parameters
Value
type
U8
Value
type
U8
52