Keyword Sms (Gprs) Commands; Keyword Configuration With Tcp; Status Info - Teltonika FMB920 User Manual

5.1.2

Keyword SMS (GPRS) commands:

"setkey <oldkeyword> <newkeyword>" - Set new or change the keyword. Configuration
should be not locked. Example:
New keyword (set):
<name>{space}<pass>{space}setkey{space}{space}<newkeyword>
Change keyword (change):
<name>{space}<pass>{space}setkey{space}<oldkeyword>{space}<newkeyword>
"delkey <keyword>" - Deletes current keyword. Configuration keyword should be
configured and not locked.
Example:
<name>{space}<pass>{space}delkey{space}<keyword>
5.1.3

Keyword configuration with TCP

If configuration has keyword, it will be saved to configuration file.
After TCP configuration: if keyword in configuration file does not match keyword in device,
configurator will ask which keyword must be used for device.
If device is locked, keyword cannot be changed with TCP configuration.
5.2

Status info

Status info monitoring FMB920 real time information in 5 different positions: Device info,
GNSS info, GSM info, OBD info and I/O info. All this information can be saved into .HTML format
with a button whitch is in device info table top right corner.
In device info user can see device name, firmware version, last device start time, RTC Time,
power voltage (mV), device IMEI, SD card free space, Device uptime, Battery voltage (mV) and
internal battery status.
In GNSS info user can see:
 Real time GNSS status information: module status (ON, deep/GPS/Online sleep
mode), how much GNSS packets device got from startup, what is fix status and
what was last GNSS fix time.
 Satellites information: how many and what type of satellites are visible. How many
satellites are used for location positioning.
 Location information: latitude, longitude, altitude, angle, HDOP, PDOP and speed.
In GSM Info user can see:
 GSM status: modem status, SIM status, GPRS status, actual operator code and GSM
signal level.
 GPRS traffic: how much data has been send from device and received from device.
 Sockets information: what server domain and port is used.
 Records: how much records were sended to server from last data reset, when last
record send to server was and when was last server response.
 SMS count: how much FMB920 received SMS and how much SMS was send from
device.
In OBD info user can see (if device connected to car with OBD II Bluetooth dongle adapter)
car's VIN code and used OBD protocol.
In I/O info user can see all I/O element values from all configurable I/O elements.
29