How To Connect Bluetooth Hands Free Adapter To Fmb Device; Bluetooth Settings Configuration - Teltonika FMB920 User Manual

will try to pair with that external device. If external device asks for PIN then
FMBXX will send user defined External PIN. After successful pairing FMBXX will
connect to paired device.
 Data Link – BT Data link mode is enabled by Configurator "Data Link" parameter:
When Data Link is configured and FMB has a link with server, paired device could
send messages via Bluetooth SPP profile directly to server. Messages will be
encoded by codec12.
External Name parameter works as substring, this allows user to enter part of the full
external device name. For example, if external device name is "HandsFreeHeadset" and user
enters "HandsFree" in External Name parameter window then FMBXX will be allowed to connect
to external device named "HandsFreeHeadset".

5.16 How to connect Bluetooth Hands Free adapter to FMB device

5.16.1 Bluetooth settings configuration

These are instructions how to easily prepare Bluetooth Hands Free device connection to
FMB device. First we need to configure FMB device Bluetooth settings for proper connection to
this hands-free unit. These are required steps:
1. Connect FMB device to PC using USB cable.
2. Launch FMB Configurator and connect to device as shown in Figure 33 below.
3. After successful connection to device wait few moments while device load current
configuration, then go to Bluetooth section that visible at Figure 34
NOTE: FMBXX supports ONE connection at a time.
Figure 33 FMB920 configurator connected devices window
53