Countrecs; Deleterecords; Setdigout; Battery - Teltonika FMB920 User Manual

countrecs

deleterecords

setdigout # #

battery

wdlog

fc_reset

towingreact

auto_calibrate
position_info
Command
calibrate

odoset:#

odoget

btgetlist #

btscan
btvisible #
btrelease #
btunpair #
defaultcfg

obdinfo

faultcodes
setkey # #
delkey #
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
Returns records number
Delete all records from SD card
Set digital output
1.# – 0 or 1 (0 - OFF or 1 – ON)
2.# – timeout value if needed (in seconds)
Returns battery state info.
Returns all information about "watch dogs" restarts.
Resets fuel consumption parameters
Towing reactivation
Calibrate position if car accelerate straight to > 30
km/h for 5 sec.
Indicates what axis is set to the front of the car.
Description
Zero out accelerometer axis (vehicle speed must be 0
km/h.)
Set total odometer value.
# - new odometer value in km
Display current odometer value
Returns requested Bluetooth list.
# - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected)
Starts Bluetooth scan.
Sets Bluetooth to visible with TMO.
# - visibility TMO (from 1 to 255 seconds).
Disconnects from current device and pauses auto
connect functionality for TMO
# - none or TMO (from 1 to 255 seconds).
Unpair Bluetooth device.
# - all, BT address (all – unpair all devices, BT address –
unpair only specified MAC address).
Load default configuration.
If connected with Bluetooth OBD dongle displays all
available information from OBD.
If connected with Bluetooth OBD dongle display all
visible fault codes.
Add new or change current configuration keyword. If
device is locked, keyword cannot be changed
1.# - old keyword (if adding new keyword space (view
chapter 5.1.2))
2.# - new keyword
Remove existing keyword. (If device is locked, keyword
cannot be changed)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Response
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
67