Bbread; Bbinfo; Sdformat; Parameter List - Teltonika FMB920 User Manual

Bad server
params
Log enable failed

6.1.25 bbread #

# describes start offset and is an optional field. # of value 20 means that blackbox data is
requested starting from 20
single SMS.
Example: X1:Y1,X2:Y2,...,Xn:Yn, where Xn – HEX value of event ID. Yn – HEX value of custom
data field (optional).

6.1.26 bbinfo #

# describes start offset and is an optional field. # of value 20 means that blackbox data is
requested starting from 20
single SMS.
Example: X1-Y1:Z1,X2-Y2:Z2,...,Xn-Yn:Zn, where Xn – timestamp in HEX. Yn – HEX value of
event ID. Zn – HEX value of custom data field (optional).

6.1.27 sdformat

Format sd card (deleta all information from SD card).

7 PARAMETER LIST

7.1

System parameters

7.1.1

Sleep Mode (ID=102)

Device has three sleep modes: GPS sleep, Deep Sleep and Online Deep Sleep mode. While
sleep is disabled (value 0) module will never enter sleep mode, in sleep mode (value 1) module
reduces level of power usage by turning GPS module to sleep, in deep sleep mode (value 2)
module turns GPS module to sleep and device is deregistered from network (note, that FMB920
do not receive SMS while in deep sleep), online Deep Sleep mode (value 3) device works as in
Deep Sleep mode, but without deregistering from GSM network. GSM part stays powered, so
-4
-5
Note: Any argument can be omitted.
th
latest event. When # is omitted the latest events are packet to
th
latest event. When # is omitted the latest events are packet to
Write failed
Commit failed
Open failed
Close failed
Created dir failed
Memory alloc
failed
4
5
6
7
8
9
74