5.19 How to connect OBD II Bluetooth Dongle to FMB device
5.19.1 Bluetooth settings configuration
These are instructions how to easily prepare Bluetooth Dongle connection to FMB device.
First we need to configure FMB device Bluetooth settings for proper connection to this unit.
These are required steps:
1. Connect FMB device to PC using USB cable.
2. Launch FMB Configurator and connect to device as shown in Figure 33 below.
3. After successful connection to device wait few moments while device load current
configuration, then go to Bluetooth section that visible at Figure 37.
Figure 37 1- Bluetooth settings; 2 - Enable Bluetooth; 3 - Bluetooth local name; 4 - Bluetooth
security mode; 5 - OBD II connection mode; 6 - External OBD II Bluetooth device name; 7 - Authorized
Figure 36 FMB920 configurator connected devices window
Devices MAC List; 8 - Save device configuratio
58