Display Cfd Status - HP 7500 Series High Availability Command Reference

Service instance 6:
Maintenance domain: mdtest_6
Maintenance association: matest_6
Level: 6
MEP ID: 730
Service instance 6:
Maintenance domain: (Without Name)
Maintenance association: matest_6
Level: 6
MEP ID: 731
Table 19 Command output
Field
2 service instance(s) are configured.
Service instance 5
Maintenance domain
Maintenance association:
Level
VLAN
MIP rule
CCM interval
MEP ID
Interface
Direction

display cfd status

Use display cfd status to display the status of CFD and AIS (enabled or disabled).
Syntax
display cfd status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
VLAN: 6 MIP rule: None
Interface: GigabitEthernet1/0/1
VLAN: 6 MIP rule: None
Interface: GigabitEthernet1/0/2
CCM interval: 1s
Direction: Inbound
CCM interval: 1s
Direction: Outbound
Description
Number of service instance configured.
Service instance ID.
MD of the service instance. (If the MD does not have a name, this
field is displayed as Without Name.)
MA of the service instances.
MD level.
VLAN to which the MA belongs.
MIP generation rules configured on service instance.
Interval to send CCMs.
ID of MEPs configured on the service instance.
Interface of the MEP configured on the service instance.
Direction of the MEPs configured on the service instance.
52