Ipv6 Address And Prefix Acquisition Configuration Example - HPE FlexNetwork HSR6800 Configuration Manual

# Verify that the client has obtained an IPv6 prefix.
[Router] display ipv6 prefix 1
Number: 1
Type : Dynamic
Prefix: 12:34::/48
Preferred lifetime 100 sec, valid lifetime 200 sec
# After DHCPv6 server is enabled on the device, verify that configuration parameters are saved in a
dynamic DHCPv6 option group.
[Router] display ipv6 dhcp option-group 1
DHCPv6 option group: 1
DNS server addresses
Type: Dynamic (DHCPv6 prefix allocation)
Interface: GigabitEthernet2/1/1
2000::FF
Domain name:
Type: Dynamic (DHCPv6 prefix allocation)
Interface: GigabitEthernet2/1/1
example.com
SIP server addresses:
Type: Dynamic (DHCPv6 prefix allocation)
Interface: GigabitEthernet2/1/1
2:2::4
SIP server domain names:
Type: Dynamic (DHCPv6 prefix allocation)
Interface: GigabitEthernet2/1/1
bbb.com

IPv6 address and prefix acquisition configuration example

Network requirements
As shown in
configuration parameters from the DHCPv6 server. The parameters include IPv6 address, IPv6
prefix, DNS server address, domain name suffix, SIP server address, and SIP server domain name.
Figure 105 Network diagram
Figure 105, configure GigabitEthernet 2/1/1 of the router to use DHCPv6 to obtain
267