Step
3.
Configure keepalive
parameters.
Setting the retry timer
The VAM server starts the retry timer after it sends a request to a client. If the server does not receive
a response from the client before the retry timer expires, the server resends the request. The server
stops sending the request after receiving a response from the client or after the timeout timer
(product of the keepalive interval and keepalive attempts) expires.
To set the retry timer:
Step
1.
Enter system view.
2.
Enter ADVPN domain view.
3.
Set the retry timer.
Configuring the VAM client
Tasks at a glance
(Required.)
(Required.)
(Required.)
(Required.)
(Required.)
(Optional.)
Setting the retry interval and retry number for a VAM client
(Optional.)
Setting the dumb timer for a VAM client
(Optional.)
Configuring a username and password for a VAM client
Creating a VAM client
Step
1.
Enter system view.
2.
Create a VAM client and
enter its view.
Creating a VAM client
Enabling VAM clients
Specifying VAM servers
Specifying an ADVPN domain for a VAM client
Configuring a pre-shared key for a VAM client
Command
keepalive interval interval retry
retries
Command
system-view
vam server advpn-domain
domain-name [ id domain-id ]
retry interval interval
Command
system-view
vam client name client-name
334
Remarks
By default, the keepalive interval
is 180 seconds, and the maximum
number of keepalive retries is 3.
Remarks
N/A
N/A
By default, the retry timer is 5
seconds.
Remarks
N/A
By default, no client is created.