Enabling The Dhcp Server On An Interface; Applying An Address Pool On An Interface; Configuring A Dhcp Policy For Dynamic Address Assignment - HPE FlexNetwork HSR6800 Configuration Manual
Comware 7 layer 3, ip services
Hide thumbs
Also See for FlexNetwork HSR6800:
- Security command reference (538 pages) ,
- Configuration manual (482 pages) ,
- Command reference manual (153 pages)
Table of Contents
Advertisement
Step
1.
Enter system view.
2.
Enable DHCP.
Enabling the DHCP server on an interface
Perform this task to enable the DHCP server on an interface. Upon receiving a DHCP request on the
interface, the DHCP server assigns the client an IP address and other configuration parameters from
a DHCP address pool.
To enable the DHCP server on an interface:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Enable the DHCP server on
the interface.
Applying an address pool on an interface
Perform this task to apply a DHCP address pool on an interface.
Upon receiving a DHCP request from the interface, the DHCP server performs address allocation in
the following ways:
•
If a static binding is found for the client, the server assigns the static IP address and
configuration parameters from the address pool that contains the static binding.
•
If no static binding is found for the client, the server uses the address pool applied to the
interface for address and configuration parameter allocation.
To apply an address pool on an interface:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Apply an address pool on the
interface.
Configuring a DHCP policy for dynamic address
assignment
In a DHCP policy, each DHCP user class has a bound DHCP address pool. Clients matching
different user classes obtain IP addresses and other parameters from different address pools. The
Command
system-view
dhcp enable
Command
system-view
interface interface-type interface-number
dhcp select server
Command
system-view
interface interface-type
interface-number
dhcp server apply ip-pool
pool-name
44
Remarks
N/A
By default, DHCP is disabled.
Remarks
N/A
N/A
By default, the DHCP
server on the interface
is enabled.
Remarks
N/A
N/A
By default, no address pool is applied
on an interface.
If the applied address pool does not
exist, the DHCP server fails to perform
dynamic address allocation.
Advertisement
Table of Contents
Troubleshooting
