Setting The Dscp Value For Dhcpv6 Packets Sent By The Dhcpv6 Server; Configuring Dhcpv6 Binding Auto Backup - HPE FlexNetwork HSR6800 Configuration Manual

Setting the DSCP value for DHCPv6 packets sent
by the DHCPv6 server
The DSCP value of a packet specifies the priority level of the packet and affects the transmission
priority of the packet.
To set the DSCP value for DHCPv6 packets sent by the DHCPv6 server:
Step
1. Enter system view.
2. Set the DSCP value for
DHCPv6 packets sent by the
DHCPv6 server.

Configuring DHCPv6 binding auto backup

The auto backup feature saves DHCPv6 bindings to a backup file, and allows the DHCPv6 server to
download the bindings from the backup file at the server reboot. The bindings include the lease
bindings and conflicted IPv6 addresses. They cannot survive a reboot on the DHCPv6 server.
The DHCPv6 server does not provide services during the download process. If a connection error
occurs during the process and cannot be repaired in a short amount of time, you can terminate the
download operation. Manual interruption allows the DHCPv6 server to provide services without
waiting for the connection to be repaired.
To configure DHCPv6 binding auto backup:
Step
1. Enter system view.
2. Configure the DHCPv6 server
to back up the bindings to a
file.
3. (Optional.) Manually save the
DHCPv6 bindings to the
backup file.
4. (Optional.) Set the waiting
time after a DHCPv6 binding
change for the DHCPv6
server to update the backup
file.
5. (Optional.) Terminate the
download of DHCPv6
bindings from the backup file.
Command
system-view
ipv6 dhcp dscp
dscp-value
Command
system-view
ipv6 dhcp server database
filename { filename | url url
[ username username [ password
{ cipher | simple } string ] ] }
ipv6 dhcp server database
update now
ipv6 dhcp server database
update interval interval
ipv6 dhcp server database
update stop
246
Remarks
N/A
By default, the DSCP value in DHCPv6
packets sent by the DHCPv6 server is
56.
Remarks
N/A
By default, the DHCPv6 server
does not back up the DHCPv6
bindings.
With this command executed,
the DHCPv6 server backs up its
bindings immediately and runs
auto backup.
N/A
The default waiting time is 300
seconds.
If no DHCPv6 binding changes,
the backup file is not updated.
N/A