HP FlexFabric 12500 Command Reference Manual page 135

Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Displays service instance information for the specified Layer 2
Ethernet interface. If no interface is specified, this command displays service instance information for all
Layer 2 Ethernet interfaces.
service-instance instance-id: Displays information about the service instance specified by its ID in the
range of 1 to 4096. If interface interface-type interface-number is specified without this option, the
command displays information about all service instances on the specified Layer 2 Ethernet interface.
verbose: Displays detailed information. Without this keyword, the command displays brief information.
Examples
# Display brief information about all service instances.
<Sysname> display l2vpn service-instance
Total number of service-instances: 5, 5 up, 0 down
Total number of ACs: 4, 4 up, 0 down
Interface
GE3/0/3
GE3/0/3
GE3/0/3
GE3/0/3
GE3/0/3
Table 43 Command output
Field
SrvID
Owner
Type
# Display detailed information about all service instances on the Layer 2 Ethernet interface
GigabitEthernet 3/0/1.
<Sysname> display l2vpn service-instance interface GigabitEthernet 3/0/1 verbose
Interface: GE3/0/1
Service Instance: 1
Encapsulation : s-vid 1 to 16
Xconnect-group: vpws1
Connection
Link ID
SrvID Owner
1 vpws1
2 vpws2
3 vpws3
4 vpws4
5
Description
Service instance ID.
Name of the cross-connect group bound to the service instance. If no cross-connect
group is bound, this field is blank.
L2VPN type: VPLS or VPWS.
: actopw
: 1
130
LinkID State Type
1 Up VPWS
1 Up VPWS
1 Up VPWS
1 Up VPWS
Up