HP FlexFabric 12500 Command Reference Manual page 117

Syntax
display bgp routing-table vpnv6 peer ip-address { advertised-routes | received-routes }
[ network-address prefix-length | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
ip-address: Specifies a peer by its IP address.
advertised-routes: Displays routing information advertised to the specified peer.
received-routes: Displays routing information received from the specified peer.
network-address prefix-length: Displays the BGP VPNv6 route that exactly matches the specified network
address and prefix length. The prefix length is in the range of 0 to 128. Without this parameter, the
command displays all BGP VPNv6 routes.
statistics: Displays route statistics.
Examples
# Display all BGP VPNv6 routing information advertised to BGP peer 3.3.3.9 on the public network.
<Sysname> display bgp routing-table vpnv6 peer 3.3.3.9 advertised-routes
Total number of routes: 1
BGP local router ID is 1.1.1.9
Status codes: * - valid, > - best, d - dampened, h - history,
Route distinguisher: 100:1
Total number of routes: 1
* > Network : 2001:1::
NextHop : ::
MED
Path/Ogn: ?
# Display all BGP VPNv6 routing information received from BGP peer 3.3.3.9 on the public network.
<Sysname> display bgp routing-table vpnv6 peer 3.3.3.9 received-routes
Total number of routes: 1
BGP local router ID is 1.1.1.9
Status codes: * - valid, > - best, d - dampened, h - history,
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
: 0
112
PrefixLen : 96
LocPrf :
OutLabel : NULL