HP FlexFabric 12500 Command Reference Manual page 15

NHLFE ID : 2000
State : Active
Out-Label : 1800
Nexthop : 10.1.1.2
Out-Interface: Vlan10
Table 6 Command output
Field
Destination
FEC
Protocol
LSR Type
Service
Path ID
NHLFE ID
State
Inbound Statistics
BkLabel
BkNexthop
BkInterface
Description
LSP destination address.
Forwarding equivalence class:
•
IP address/mask—Classifies FECs by destination address.
•
IP address—Classifies FECs by next hop.
•
IP address/Out Label—Classifies FECs by next hop and outgoing label.
•
- (a hyphen)—The LSP is a static transit LSP or static egress LSP.
Label distribution protocol:
•
LDP.
•
BGP.
•
Static.
•
Local—Direct LSP.
LSR type:
•
Ingress—The current LSR is the ingress node of the LSP.
•
Transit—The current LSR is a transit node of the LSP.
•
Egress—The current LSR is the egress node of the LSP.
Service deployed on the LSP. The service can only be Statistics, which
indicates the MPLS forwarding statistics function.
Forwarding path. The value is in the format of 0xnn.m, where nn represents
the NHLFE group ID of the outer LSPs that carry the current LSP, and m
represents the sequence number of the equivalence path.
NHLFE entry index.
LSP state:
•
Active—The LSP is in use.
•
Inactive—The LSP is idle.
MPLS forwarding statistics in inbound direction:
•
Octets—Number of received octets.
•
Packets—Number of received packets.
•
Errors—Number of received error packets.
•
Discards—Number of discarded packets.
Outgoing label of the backup LSP.
Next hop address of the backup LSP.
Outgoing interface of the backup LSP.
10