Display L2Vpn Interface - HP FlexFabric 12500 Command Reference Manual

VCCV CC
VCCV BFD
Tunnel Group ID : 0x60000000
Tunnel NHLFE IDs: 1025
Link ID: 1
PW Type
In Label
MTU
PW Attributes
VCCV CC
VCCV BFD
Tunnel Group ID : 0x160000001
Tunnel NHLFE IDs: 1027
Table 38 Command output
Field
PW State
PW Attributes
VCCV CC
VCCV BFD
Tunnel Group ID
Tunnel NHLFE IDs

display l2vpn interface

Use display l2vpn interface to display L2VPN information for Layer 3 interfaces bound to cross-connects.
Syntax
display l2vpn interface [ xconnect-group group-name | interface-type interface-number ]
Views
Any view
: Router-Alert
: Fault Detection with BFD
: VLAN
: 1278
: 1500
: Main
: Router-Alert
: Fault Detection with BFD
Description
PW state: Up, Down, Blocked, or BFD Defect.
Blocked indicates that the PW is a backup PW. BFD Defect indicates BFD has
detected a defect on the PW.
PW attribute:
•
Main—The PW is the primary PW.
•
Backup—The PW is the backup PW.
VCCV CC type:
•
Control word.
•
Route alert.
•
TTL.
VCCV BFD type:
•
Fault Detection with BFD. BFD packets use IP/UDP encapsulation (with IP/UDP
Headers).
•
Fault Detection with Raw-BFD. BFD packets use PW-ACH encapsulation
(without IP/UDP Headers).
ID of the tunnel group for the PW.
NHLFE IDs of the public tunnels that carry the PW.
If equal-cost tunnels are available, this field displays multiple tunnel NHLFE IDs.
If no tunnel is available, this field displays None.
125
PW State : Up
Out Label: 1151