Display Mpls Nib - HP FlexFabric 12500 Command Reference Manual

Field
Ingress
Transit
Egress
Active

display mpls nib

Use display mpls nib to display MPLS Nexthop Information Base (NIB) information.
Syntax
display mpls nib [ nib-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
nib-id: Specifies a next hop ID in the range of 1 to FFFFFFFFFFFFFFFE. If you do not specify a next hop,
this command displays information about all MPLS next hops.
Examples
# Display information about all MPLS next hops.
<Sysname> display mpls nib
NIB ID: 0x40000000
Users: 1
Status: Active
ECMP number: 1
Outgoing NHLFE ID: 1024
Backup outgoing NHLFE ID: 1027
Table 8 Command output
Field
NIB ID
Users
Status
ECMP number
Description
Number of LSPs that take the local device as the ingress node.
Number of LSPs that take the local device as a transit node.
Number of LSPs that take the local device as the egress node.
Number of active LSPs of a specific type.
Description
ID of the next hop.
Number of ILM entries that use this next hop.
Next hop status:
•
Active—The next hop is active.
•
Dummy—The next hop is inactive.
Number of equal-cost NHLFE entries.
12