Ext-Community-Type - HP FlexFabric 12500 Command Reference Manual

IPv4/IPv6 VPN prefers the export routing policy specified in IPv4/IPv6 VPN view over the one specified
in VPN instance view.
Examples
# Apply export routing policy poly-1 for VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] export route-policy poly-1
# Apply export routing policy poly-2 for IPv4 VPN vpn2.
<Sysname> system-view
[Sysname] ip vpn-instance vpn2
[Sysname-vpn-instance-vpn2] address-family ipv4
[Sysname-vpn-ipv4-vpn2] export route-policy poly-2
# Apply export routing policy poly-3 for IPv6 VPN vpn3.
<Sysname> system-view
[Sysname] ip vpn-instance vpn3
[Sysname-vpn-instance-vpn3] address-family ipv6
[Sysname-vpn-ipv6-vpn3] export route-policy poly-3
Related commands
import route-policy
•
route-policy (Layer 3—IP Routing Configuration Guide)
•

ext-community-type

Use ext-community-type to configure the type code of an OSPF extended community attribute.
Use undo ext-community-type to restore the default.
Syntax
ext-community-type { domain-id type-code1 | router-id type-code2 | route-type type-code3 }
undo ext-community-type { domain-id | router-id | route-type }
Default
The type codes for domain ID, router ID, and route type are 0x0005, 0x0107, and 0x0306, respectively.
Views
OSPF view
Predefined user roles
network-admin
mdc-admin
Parameters
domain-id type-code1: Specifies the type code for domain ID. Valid values are 0x0005, 0x0105,
0x0205, and 0x8005.
router-id type-code2: Specifies the type code for router ID. Valid values are 0x0107 and 0x8001.
router-type type-code3: Specifies the type code for route type. Valid values are 0x0306 and 0x8000.
80