Pw-Class - HP FlexFabric 12500 Command Reference Manual

Usage guidelines
To create a static PW, you must specify the incoming and outgoing labels. To enter the view of an existing
static PW, you do not need to specify the incoming and outgoing labels.
If you do not specify the incoming and outgoing labels when you create a new PW, LDP is used to create
the PW.
The PW ID for a PW must be the same on the PEs at the ends of the PW.
The LSR ID of the peer PE and the PW ID uniquely identify a PW, and must not both be the same as those
of any VPLS PW or PW bound to a cross-connect.
The static PW must not have the same incoming label as an existing static LSP or static CRLSP. If it is the
same, the static PW will not be available, even if you modify the incoming label of the static LSP or the
static CRLSP. To make the static PW available, delete the static PW, and reconfigure it with an unused
incoming label.
Examples
# Configure an LDP PW destined to 4.4.4.4 for the cross-connect pw2pw in the cross-connect group
vpn1 and enter cross-connect PW view. The PW ID is 200.
<Sysname> system-view
[Sysname] xconnect-group vpn1
[Sysname-xcg-vpn1] connection pw2pw
[Sysname-xcg-vpn1-pw2pw] peer 4.4.4.4 pw-id 200
[Sysname-xcg-vpn1-pw2pw-4.4.4.4-200]
# Configure a static PW destined to 5.5.5.5 for the cross-connect pw2pw in the cross-connect group
vpn1 and enter cross-connect PW view. The static PW has an ID of 200, an incoming label of 100, and
an outgoing label of 200.
<Sysname> system-view
[Sysname] xconnect-group vpn1
[Sysname-xcg-vpn1] connection pw2pw
[Sysname-xcg-vpn1-pw2pw] peer 5.5.5.5 pw-id 200 in-label 100 out-label 200
[Sysname-xcg-vpn1-pw2pw-5.5.5.5-200]
Related commands
display l2vpn ldp
•
display l2vpn pw
•

pw-class

•
• tunnel-policy
pw-class
Use pw-class to create a PW class and enter PW class view.
Use undo pw-class to delete a PW class.
Syntax
pw-class class-name
undo pw-class class-name
136