Vpn-Id - HP FlexFabric 12500 Command Reference Manual
Routing switch series, mpls
Hide thumbs
Also See for FlexFabric 12500:
- Configuration manual (402 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (154 pages)
Table of Contents
Advertisement
Predefined user roles
network-admin
mdc-admin
Usage guidelines
After you execute the vpn popgo command, the egress PE disconnects and reestablishes BGP sessions to
re-learn VPN routes.
After the vpn popgo command is executed, the egress PE does not support load sharing among VPN
BGP peers.
Examples
# Specify the VPN label processing mode on the egress PE as POPGO forwarding.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] vpn popgo
# Specify the VPN label processing mode on the egress PE as POP forwarding.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] undo vpn popgo
vpn-id
Use vpn-id to configure a VPN ID for a VPN instance.
Use undo vpn-id to remove the VPN ID of a VPN instance.
Syntax
vpn-id
undo vpn-id
Default
No VPN ID is configured for a VPN instance.
Views
VPN instance view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-id: Specifies a VPN ID for the VPN instance, in the form of OUI:Index. Both OUI and Index are hex
numbers. The OUI is in the range of 0 to FFFFFF, and the index is in the range of 0 to FFFFFFFF.
Usage guidelines
The VPN ID uniquely identifies the VPN instance. Different VPN instances must have different VPN IDs.
The VPN ID cannot be 0:0.
98
Advertisement
Table of Contents
