Ip Binding Vpn-Instance - HP FlexFabric 12500 Command Reference Manual

[Sysname-vpn-instance-vpn2] address-family ipv4
[Sysname-vpn-ipv4-vpn2] import route-policy poly-2
# Apply import routing policy poly-3 for IPv6 VPN vpn3.
<Sysname> system-view
[Sysname] ip vpn-instance vpn3
[Sysname-vpn-instance-vpn3] address-family ipv6
[Sysname-vpn-ipv6-vpn3] import route-policy poly-3
Related commands
export route-policy
•
• route-policy (Layer 3—IP Routing Configuration Guide)

ip binding vpn-instance

Use ip binding vpn-instance to associate an interface with a VPN instance.
Use undo ip binding vpn-instance to remove the association.
Syntax
ip binding vpn-instance vpn-instance-name
undo ip binding vpn-instance vpn-instance-name
Default
An interface is associated with no VPN instance and belongs to the public network.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31 characters.
Usage guidelines
Use the command to associate the VPN instance with the interface connected to the CE.
This command or its undo form clears the IP address and routing protocol configuration on the interface.
After executing this command or its undo form, use the display this command to view the current
configuration and reconfigure the IP address and routing protocol on the interface.
The specified VPN instance must have been created by using the ip vpn-instance command in system
view.
To associate a new VPN instance with an interface, you must remove the previous association by using
the undo ip binding vpn-instance command and then use the ip binding vpn-instance command to
associate the new VPN instance with the interface.
Examples
# Associate interface VLAN-interface 1 with VPN instance vpn1.
<Sysname> system-view
82