Display Mpls Nid - HP FlexFabric 12500 Command Reference Manual

Field
Outgoing NHLFE ID
Backup outgoing NHLFE ID

display mpls nid

Use display mpls nid to display usage information for dynamic NIDs.
Syntax
display mpls nid [ nid-value1 [ to nid-value2 ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
nid-value1: Specifies an NID in the range of 0 to 65535. If used with the nid-value2 argument, the
nid-value1 argument represents the start NID of an NID range.
to nid-value2: Specifies the end NID of the NID range. The value range for the end NID is 0 to 65535.
If you specify an NID range by using the nid-value1 argument and the to nid-value2 option, the
command displays usage information for the specified range of NIDs.
Usage guidelines
NIDs are 32-bit binary numbers. They include fixed NIDs and dynamic NIDs.
Fixed NIDs—Generated for tunnel interfaces. The highest four bits are a value other than 0000.
•
• Dynamic NIDs—NIDs except fixed NIDs. The highest four bits are 0s.
If you do not specify any parameters, the command displays usage information for all dynamic NIDs.
Examples
# Display usage information for NIDs 1028 through 1500.
<Sysname> display mpls nid 1028 to 1500
NID alloc state: '.' means not used, '$' means used
1028 :...$.... ........ ........ ........
1092 :........ ........ ........ ........
1156 :........ ........ ........ ........
1220 :........ ........ ........ ........
1284 :........ ........ ........ ........
1348 :........ ........ ........ ........
1412 :........ ........ ........ ........
1476 :........ ........ ........ .
Description
ID of the NHLFE entry to which the next hop corresponds.
ID of the backup NHLFE entry.
........ ........ ........ ........
........ ........ ........ ........
........ ........ ........ ........
........ ........ ........ ........
........ ........ ........ ........
........ ........ ........ ........
........ ........ ........ ........
13