Vpn-Instance - HP FlexFabric 12500 Command Reference Manual

Predefined user roles
network-admin
mdc-admin
Parameters
peer-lsr-id: Specifies the LSR ID of a peer.
Examples
# Configure the device to send Targeted Hellos to the peer 3.3.3.3, and enter LDP peer view.
<Sysname> system-view
[Sysname] mpls ldp
[Sysname-ldp] targeted-peer 3.3.3.3
[Sysname-ldp-peer-3.3.3.3]
Related commands
display mpls ldp discovery
•
• display mpls ldp peer

vpn-instance

Use vpn-instance to enable LDP for a VPN instance and enter LDP-VPN instance view.
Use undo vpn-instance to delete the LDP-VPN instance.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance vpn-instance-name
Default
LDP is disabled for a VPN instance.
Views
LDP view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31 characters.
Usage guidelines
Enabling LDP for VPNs is used for the Carrier's Carrier network that uses LDP between the Level 1 carrier
and Level 2 carrier PEs. In such a network, you must enable LDP for each VPN on each Level 1 carrier PE.
The VPN instance specified by this command must have been created by the ip vpn-instance command
in system view.
The GR commands, the session protection command, and the targeted-peer command are available
only in LDP view. All other commands available in LDP view are available in LDP-VPN instance view.
57