Display Mpls Label - HP FlexFabric 12500 Command Reference Manual

Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by the interface type and number. If you do not
specify an interface, the command displays MPLS information for all MPLS-enabled interfaces.
Examples
# Displays all MPLS interfaces.
<Sysname> display mpls interface
Interface
GE3/0/1
GE3/0/2
The MPLS MTU of an interface is in bytes.
Related commands
mpls enable
•
mpls mtu
•

display mpls label

Use display mpls label to display MPLS label usage information.
Syntax
display mpls label { label-value1 [ to label-value2 ] | all }
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
label-value1: Specifies a label value in the range of 16 to 1048575. If used with the label-value2
argument, the label-value1 argument represents the start label of a label range.
to label-value2: Specifies the end label of the label range. The value range for the end label is 16 to
1048575. If you specify a label range by using the label-value1 argument and the to label-value2 option,
the command displays usage information for the specified range of labels.
all: Specifies all labels.
Status MPLS MTU
Up 1514
Up 1514
5