Peer Upe - HP FlexFabric 12500 Command Reference Manual

Examples
# In BGP VPNv4 address family view, configure the device to not change the next hop of routes
advertised to EBGP peer 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family vpnv4
[Sysname-bgp-af-vpnv4] peer 1.1.1.1 next-hop-invariable
Related commands
peer next-hop-local (Layer 3—IP Routing Command Reference)

peer upe

Use peer upe to configure a BGP peer or peer group as a HoVPN UPE in BGP VPNv4 address family
view.
Use undo peer upe to remove the configuration.
Syntax
peer { group-name | ip-address } upe
undo peer { group-name | ip-address } upe
Default
No BGP peer or peer group is configured as a UPE.
Views
BGP VPNv4 address family view
Predefined user roles
network-admin
mdc-admin
Parameters
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The
specified peer group must have been created.
ip-address: Specifies a peer by its IP address. The specified peer must have been created.
Usage guidelines
A UPE is a special VPNv4 peer. It can accept one default route for each related VPN instance and routes
permitted by the routing policy on the SPE. An SPE is a common VPN peer.
Examples
# Configure peer 1.1.1.1 as a UPE.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family vpnv4
[Sysname-bgp-vpnv4] peer 1.1.1.1 upe
85