Configuring the Ports
RF Diagnostics Port
There are two diagnostic ports, the RF-DLC Base Diagnostic port and the RF-DLC
Sub Diagnostic port. Both of these use the control interface of the RF driver to perform
RF diagnostics.
1.2.3.2 RF Diagnostic Port Configuration
1.2.3.2 RF Diagnostic Port Configuration
Port Number
Configuration Status
Port Type
Max Buffers
Transmit Buffers
Receive Buffers
Maximum Frame Size
Record Type
\ - return to menu
The following table lists the field name, the MIB name, and field options with the
default setting in bold:
Field Name
Port Number
The RF port number.
Configuration Status
Determines if this port is initialized upon reset. Off-line prevents the port from being
initialized upon reset.
Port Type
RF Sub Diagnostic port.
Max Buffers
The number of message buffers.
Transmit Buffers
The number of transmit buffers.
:3
:On-line
:RF-DLC SUB Diagnostic Port
:800
:240
:180
:1549
:Valid
. - commands
TAB - next available field
MIB
[swRFDiagPortIndex]
[swRFDiagPortConfigSta-
tus]
[swRFDiagPortPorttype]
[swRFDiagPortMax-
Buffers]
[swRFDiagPortTransDesc]
Record 1 of 3
ENTER - edit
Settings (default in
bold)
3
• On-line
• Off-line
RF Sub Diagnostics Port
800
240
73