Table of Contents
Advertisement
Note
78
1.2.3.1.2 RF Sub Port Configuration
1.2.3.1.2 RF Sub Port Configuration
Port Number
Configuration Status
Port Type
Max Buffers
Transmit Buffers
Receive Buffers
Maximum Frame Size
Sub Station Number
Link down Timeout Interval (1.5 msec) :320
Record Type
\ - return to menu
Type
.A to begin editing the screen.
Use this screen to set the sub station port parameters. The following table lists the field
name, MIB, and the default, or field options with the default in bold:
Field Name
Port Number:
The RF physical port number is 3.
Configuration Status:
Determines if the port is initialized when a reset occurs. Set Off-line to prevent the
port from initializing upon reset. Online initializes the port upon reset.
Port Type
This read-only field defines this port as a sub station port.
Max Buffers:
The number of message buffers allocated to this sub station port.
Transmit Buffers:
The number of transmit buffers.
Receive Buffers:
:3
:On-line
:RF-DLC Sub Port
:800
:240
:180
:3200
:0
:Valid
. - commands
TAB - next available field
MIB
[swRFSubPortIndex]
[swRFSubPortConfigSta-
tus]
[swRFSubPortPortType]
[swRFSubPortMaxBuffers]
[swRFSubPortTransDesc]
[swRFSubPortRecvDesc]
Record 0 of 0
ENTER - edit
Settings (default in
bold)
3
• • • • On-line
On-line
On-line
On-line
• Off-line
Sub Port
800
338
140
Advertisement
Table of Contents
